Filter
Top Products
*
SURFACE
18.46
*
SURFACE: Define a surface or region in a model.
This option is used to define surfaces for contact simulations, tie constraints, fasteners, and coupling, as
well as regions for distributed surface loads, acoustic radiation, acoustic im pedance, and output of integrated
quantities on a surface. In ABAQUS/Standard it is also used to define surfaces for cavity radiation analysis
and assembly loads. In ABAQUS/Explici t this option can also be used to define boundary regions on adaptive
mesh domains.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Part, Part instance, Assembly
References:
•
“Surfaces: overview,” Section 2.3.1 of the ABAQUS Analysis User’s Manual
•
“Defining element-based surfaces,” Section 2.3.2 of the ABAQUS Analysis User’s Manual
•
“Defining node-based surfaces,” Section 2.3.3 of the ABAQUS Analysis User’s Manual
•
“Defining analytical rigid surfaces,” Section 2.3.4 of the ABA QUS Analysis User’s Manual
•
“Operating on surfaces,” Section 2.3.5 of the ABAQUS Analysis User’s Manual
•
“Contact interaction analysis: overview,” Section 29.1.1 of the ABAQUS Analysis User ’s Manual
•
“RSURFU,” Section 1.1.15 of the ABAQUS User Subroutines Reference Manual
Required parameter:
NAME
Set this parameter equal to a label that will be used to refer to the surface.
Required parameter for cavity radiation simulations:
PROPERTY
This parameter applies only to ABAQUS/Standard analyses.
Set this parameter equal to the name of the
*
SURFACE PROPERTY definition associated with
this surface. See “Cavity radiation,” Section 32.1.1 of the ABAQUS Analysis User’s Manual.
Optional parameters:
COMBINE
Set COMBINE=UNION to create a surface based on the union of two or more surfaces of the same
type.
18.46–1
ABAQUS Version 6.1 Module:
ID:
Printed on: