Filter
Top Products
*
SUBSTRUCTURE PROPERTY
Data lines to translate, rotate, and reflect a substructure:
First line:
1. Value of the translation to b e applied in the global X-direction.
2. Value of the translation to b e applied in the global Y-direction.
3. Value of the translation to be applied in the global Z-direction.
Second line:
1. Global X-coordinate of point a on the axis of rotation (see Figure 18.45–1).
2. Global Y-coordinate of point a on the axis of rotation.
3. Global Z-coordinate of poin t a on the axis of rotation.
4. Global X-coordinate of point b on the axis of rotation.
5. Global Y-coordinate of point b on the axis o f rotation.
6. Global Z-coordinate of poin t b on the axis of rotation.
7. Angle of rotation about the axis a–b, in degrees.
Third line:
1. Global X-coordinate of point a in the plane of reflection (see Figure 18.45–2).
2. Global Y-coordinate of point a in the plane of reflection.
3. Global Z-coordinate of point a in the plane o f reflection.
4. Global X-coordinate of point b in the plane of reflection.
5. Global Y-coordinate of point b in the plane of reflection.
6. Global Z-coordinate of point b in the plane of reflection.
Fourth line:
1. Global X-coordinate of point c in the plane of reflection.
2. Global Y-coordinate of point c in the plane of reflection.
3. Global Z-coordinate of point c in the plane of reflection.
18.45–3
ABAQUS Version 6.1 Module:
ID:
Printed on: