Filter
Top Products
*
TIME POINTS
19.6
*
TIME POINTS: Specify time points at which data are written to the output database
or restart files, or specify time points in the loading history at which the response of
a structure w ill be evaluated in a direct cyclic analysis.
This option is used to specify time points at which data are written to the output database or restart files or, if
it is used in conjunction with the
*
DIRECT CYCLIC option, to specify time points in the loading history at
which the response of a structure will be evaluated.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Model
References:
• *
DIRECT CYCLIC
• *
OUTPUT
Required parameter:
NAME
Set this param eter equal to a label that will be used to refer to the time points.
Optional parameters:
GENERATE
If this parameter is included, each data line should give a starting time point,
; an ending time
point,
; and the time increment between these two specified time points, .
INPUT
Set this parameter equal to the name of the alternate input file containing the data lines for this
option. See “Input syntax rules,” Section 1.2.1 of the ABAQ US Analysis User’s Manual, for the
syntax of such file names. If this parameter is omitt ed, it is assumed that the data follow the key word
line.
19.6–1
ABAQUS Version 6.1 Module:
ID:
Printed on: