Filter
Top Products
*
NODE OUTPUT
14.10
*
NODE OUTPUT: Define output database requests for nodal data.
This option is used to write nodal variables to the output data base. It must be used in conjunction with the
*
OUTPUT option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: History data
Level: Step
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
• *
OUTPUT
One of the following mutually exclusive parameters is required when the
*
NODE OUTPUT option
is used in conjunction with the
*
OUTPUT, HISTORY option:
NSET
Set this parameter eq ual to the name of the node set for which this output request is being made.
TRACER SET
This parameter applies only to ABAQUS/Explic it analyses.
Set this parameter equal to the name of the tracer set for which this output request is being
made.
Optional parameters when the
*
NODE OUTPUT option is used in conjunction with the
*
OUTPUT,
FIELD option:
NSET
Set this parameter eq ual to the name of the node set for which this output request is being made.
If this parameter is omitted, the output will be writ ten for all the nodes in the model.
TRACER SET
This parameter applies only to ABAQUS/Explic it analyses.
Set this parameter equal to the name of the tracer set for which this output request is being
made.
This parameter is valid only for displacement output requests.
14.10–1
ABAQUS Version 6.1 Module:
ID:
Printed on: