Filter
Top Products
*
OUTPUT
Using
*
OUTPUT in an ABAQUS/Explicit analysis
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
“ABAQUS/Explicit output variable identifiers,” Section 4.2.2 of the ABAQUS Analysis User’s Manual
•
“Overview of job diagnostics,” Section 23.1 of the ABAQ US/CAE User’s Manual
• *
CONTACT OUTPUT
• *
ELEMENT OUTPUT
• *
ENERGY OUTPUT
• *
INCREMENTATION OUTPUT
• *
NODE OUTPUT
• *
TIME POINTS
One of the following mutually exclusive parameters is required:
FIELD
Include this parameter to indicate that the output requests used in conjunction with the
*
OUTPUT
option will b e written to the output databa se as field-type output.
HISTORY
Include this parameter to indicate that the output requests used in conjunction with the
*
OUTPUT
option will be wr itten to the output databa se as history-ty pe output.
The following parameters are optional and valid only if the FIELD parameter is included:
NUMBER INTERVAL
Set this parameter equal to the number of intervals during the step at which the output database
states are to be w ritten. ABAQUS/Explicit will alwa ys write the results at the beginning of the
step. For example, if NUMBER INTERVAL=10, ABA QUS/Explicit will write 11 output database
states consisting of the values at the beginning of the step and the values at the end of 10 intervals
throughout the step . The value of this parameter must be a positive inte ger or zero. A value of zero
suppresses all output. If this parameter is omitted, its value will be set to 20.
The NUMBER INTERVAL and TIME POINTS parameters are mutually exclusive.
TIME MARKS
Set TIME MARKS=NO (default) to write results to the output database at the increm ent ending
imm ediately after the time dictated by the NUMBER INTERVAL or TIME POINTS parameter.
Set TIME MARKS=YES to write results at the exact times dictated by the NUMBER
INTERVAL or TIME POINTS parameter.
TIME MARKS=YES cannot be used when either the FIXED TIME INCREMENTATION or
DIRECT USER CONTROL parameter is included on the
*
DYNAMIC option.
15.3–4
ABAQUS Version 6.1 Module:
ID:
Printed on: