Filter
Top Products
*
RADIATION PRINT
17.4
*
RADIATION PRINT: Define print requests for cavity radiation heat transfer.
This option is used to print tabular output of cavity radiation variab les (radiation fluxes, viewfactor totals, and
facet temperatures).
Product: ABAQUS/Standard
Type: History data
Level: Step
References:
•
“Cavity radiation,” Section 32.1.1 of the ABAQUS Analysis User’s Manual
•
“Output,” Section 4 .1.1 of the ABAQUS Analysis User’s Manual
Optional, mutually exclusive parameters (if not specified, output will be provided for all cavities
in the model):
CAVITY
Set this parameter equal to the name of the cavity for which this output request is being made.
ELSET
Set this parameter equal to the name of the element set for w hich this output re quest is being made.
SURFACE
Set this parameter equal to the name of the surface for which this output request is being made.
Optional parameters:
FREQUENCY
Set this parameter equal to the output frequency, in increments. The output will always be printed
at the last increm ent of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set
FREQUENCY=0 to suppress the output.
SUMMARY
Set SUM MARY=YES (default) to obtain a summ ary of the maximum and minim um values in each
column of the table and their locations.
SetSUMMARY=NOtosuppressthissummary.
TOTALS
Set TOTALS=YES to print the total of each column in the table. This is useful, for exam ple, to sum
radiation fluxes over all facets composing a radiation surface. The default is TOTALS=NO.
17.4–1
ABAQUS Version 6.1 Module:
ID:
Printed on: