Filter
Top Products
*
PLASTIC
16.12
*
PLASTIC: Specify a metal plasticity model.
This option is used to specify the plastic part of the material model for elastic-plastic materials that use the
Mises or Hill y ield surface.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Model
References:
•
“Classical metal plasticity,” Section 18.2.1 of the ABAQUS Analysis User’s Manual
•
“Model
s for metals subjected to cyclic loading,” Section 18.2.2 of the ABAQUS Analysis User ’s Manual
•
“Johnson-Cook plasticity,” Section 18.2.7 of the ABAQUS Analysis User’s Manual
•
“UHARD,” Section 1.1.26 of the ABAQUS User Subroutines Reference Manual
Optional parameter:
HARDENING
Set HARDENING=ISOTROPIC (default) to specify isotropic hardening.
Set HARDENING=KINEMATIC to specify linear kinematic hardening.
Set HARDENING=COMBINED to specify nonlinea r isotropic/kinematic hardening.
Set HARDENING=JOHNSON COOK to specify Johnson-Cook hardening in an
ABAQUS/Explicit analysis.
Set HARDENING=USER to define isotropic hardening in user subroutine UHARD in an
ABAQUS/Standard analysis.
Optional parameter for use with HARDENING=ISOTROPIC or HARDENING=COMBINED:
DEPENDENCIES
Set this parameter equal to the number of field variable d ependencies included in the definition
of hardening behavior, in addition to temperature and possibly strain range. If this parameter is
omitted, the hardening behavior does not depend on field variables. See “Specifying field variable
dependence” in “Material data definition,” Section 16.1.2 of the ABAQUS Analysis User ’s Manual,
for more information.
16.12–1
ABAQUS Version 6.1 Module:
ID:
Printed on: