Filter
Top Products
*
NONSTRUCTURAL MASS
Set DISTRIBUTION=VOLUME PROPORTIONAL to distribute the total nonstructural m ass
among the members of the element set region in proportion to the element volume in the ini tial
configuration. A uniform value is added to the underlying structural density over the element set
region; therefore, if the region has nonuniform structural density, the center of mass for the element
set region may be altered.
Data line for UNITS=TOTAL MASS:
First (and only) line:
1. Mass magnitude of the nonstructural feature for distribution over the element set region. Mass,
not weight, should be given.
ABAQUS do es not use any specific physica l units, so the user’s choice must be consistent.
Data line for UNITS=MASS PER VOLUME:
First (and only) line:
1. Mass per unit volum e of the nonstructural feature for application over the element set region.
ABAQUS do es not use any specific physica l units, so the user’s choice must be consistent.
Data line for UNITS=MASS PER AREA:
First (and only) line:
1. Mass per unit area of t he nons tructural feature for application over the element set region.
ABAQUS do es not use any specific physica l units, so the user’s choice must be consistent.
Data line for UNIT S=MASS PER LENGTH:
First (and only) line:
1. Mass per unit length of the nonstructural featur e for applica tion over the element set region.
ABAQUS do es not use any specific physica l units, so the user’s choice must be consistent.
14.13–2
ABAQUS Version 6.1 Module:
ID:
Printed on: