3D Connexion Version 6.6 Two-Way Radio User Manual


 
Trademarks and Legal N otices
CAUTIONARY NOTICE TO USERS:
This manual isintended for qualified userswhowill exercisesound engine ering judgment and expertiseintheuseofthe ABAQUSSoftware. TheABAQUS
Software is inherently complex, and the examples and procedures in this manual are not intended to be exhaustive or to apply to any particular situation.
Users are cautioned to satisfy themselves as to the accuracy and results of their analyses.
ABAQUS, Inc.will not beres ponsiblefor theaccuracyor usefulness ofany analysis performed using theAB AQUSSoftware ortheprocedures,examples,
or explanations in this manual. ABAQUS, Inc. shall not be respons iblefor the consequences of any errors or omissions that mayappear in this manual.
ABAQUS, INC.DISCLAIMS ALLEXPRESS ORIMPLIED REPRESENTATIONS ANDWARRANTIES, INCLUDINGANYIMPLIEDWARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE CONTENTS OF THIS MANUAL.
IN NO EVENT SHALL ABAQUS, INC. OR ITS THIRD-PARTY PROVIDERS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, PUNITIVE,
SPECIAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF BUSINESS INFORMATION) EVEN IF ABAQUS, INC. HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
The ABAQUS Software describedin this manual is available only u nder license from ABAQUS, Inc. and may be used or reproduced only in accordance
with the terms of such license.
This manual and the software described in this manual are subject to change without prior notice.
No part of this manual may be reproduced or distributed in any form withoutprior written permission of ABAQUS, Inc.
© 2006 ABAQUS, Inc. All rights re served.
Printed in the United States of America.
U.S. GOVERNMENT USERS: TheABAQUS Software and its documentation are “commercial items,” specifically “commercial computer software” and
“commercial computer software documentation” and, consistentwith FAR 12.212 and DFARS227.7202,as applicable, are provide d with restrictedrights
in accordance with license terms.
TRADEMARKS
The trademarks and service marks (“trademarks”) in this manual are the property of ABAQUS, Inc. or third parties. You are not permitted to use these
trademarks without the prior written consent of ABAQUS, Inc. or such third parties.
The following are trademarks or registered trademarks of ABAQUS, Inc. or its subsidiaries in the Uni ted States and/or other countries:
ABAQUS, ABAQUS/Standard, ABAQUS/Explicit, ABAQUS/CAE, ABAQUS/Viewe r, ABAQUS/Aqua, ABAQUS/Design, ABAQUS/Foundation,
ABAQUS/AMS, ABAQUS for CATIA V5, VCCT for ABAQUS, DDAM for ABAQUS, Unified FEA, and the ABAQUS Logo. The 3DS logo and
SIMULIA are tradem a rks of Dassault Systèmes.
Other company, product, and service names may be trademarks or service m arks of their respective owners. For additional information
concerning trademarks, copyrights, and licenses, see the Legal Notices in the ABAQUS Version 6.6 Release Notes and the notices at
http://www.abaqus.com/products/products_legal.html.
Cover image: bolted joint in an aircraft bra ke courtesy Honeywell Landing Systems.
ABAQUS Version 6.1 Module:
ID:
Printed on: