Filter
Top Products
*
INTERACTION OUTPUT
9.22
*
INTERACTION OUTPUT: Specify spot weld interaction variables to be written to the
output database.
This option is used to write spot weld interaction variable s to the output database. It must be used in
conjunction with the
*
OUTPUT, HISTORY option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: History data
Level: Step
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
“Mesh-independent fasteners,” Section 28.3.4 of the ABAQUS Analysis User’s Manual
• *
OUTPUT
Required, mutually exclusive parameters:
NAME
Set this parameter equal to the name of the spot weld interaction for which this output request is
being made.
NSET
Set this parameter eq ual to the name of the node set for which this output request is being made.
Data lines to request spot weld interaction output to the output database:
First line:
1. Specify the identifying keys for the output variables to be written to the output d atabase.
The keys are defined in “ABAQUS/Standard output variable identi fiers,” Sectio n 4.2.1 of
the ABAQUS Analysis User’s Manual, and “ABAQUS/Explicit output variable identifiers,”
Section 4.2.2 of the ABAQUS Analysis User’s Manual.
Repeat this data line as often as necessar y to define the list of var iables to be written to the output
database.
9.22–1
ABAQUS Version 6.1 Module:
ID:
Printed on: