Filter
Top Products
*
JOINT ELASTICITY
5. Temperature.
6. First field variable.
7. Second field variable.
8. Third field variable.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than three):
1. Fourth field variable.
2. Etc., up to eight field variables per line.
Repeat this s et of data lines as often as necessary to define the elastic behavior as a function of
temperature and other predefined field variables.
Data lines for MODULI=SPUD CAN and NDIM=3:
First line:
1. , equivalent elastic shear modulus for vertical displacements.
2.
, equivalent elastic shear modulus for horizontal displacem ents.
3.
, equivalent elastic shear modulus for rotational displacem ents.
4.
, Poisson’s ratio of the soil.
5.
, torsional elastic modulus.
6. Temperature.
7. First field variable.
8. Second field variable.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than two):
1. Third field variable.
2. Etc., up to eight field variables per line.
Repeat this s et of data lines as often as necessary to define the elastic behavior as a function of
temperature and other predefined field variables.
Data lines for MODULI=GENERAL and NDIM=2:
First line:
1. .
2.
.
3.
.
4.
.
5.
.
6.
.
10.2–2
ABAQUS Version 6.1 Module:
ID:
Printed on: