Filter
Top Products
*
INCIDENT WAVE FLUID PROPERTY
9.9
*
INCIDENT WAVE FLUID PROPERTY: Define the fluid properties associated with an
incident wave.
The preferred interface for defining the fluid properties for an incident wave is the
*
INCIDENT WAVE
INTERACTION PROPERTY option used in conjunction with the
*
INCIDENT WAVE INTERACTION
option. The alternative interface uses the
*
INCIDENT WAVE FLUID PROPERTY option to define the fluid
properties used to define an incident wave. The alternative interface will be removed in a subsequent release.
The
*
INCIDENT WAVE FLUID PROPERTY must be used in conjunction with the
*
INCIDENT WAVE
PROPERTY option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Model
References:
•
“Acoustic medium,” Section 20.3.1 of the ABA QUS Analysis User’s Manual
•
“Acoustic loads,” Section 27.4.5 of the ABAQUS Analysis User’s Manual
• *
INCIDENT WAVE PROPERTY
There are no parameters associated with this option.
Data line to define incident wave fluid properties:
First (and only) line:
1. , the fluid bulk modulus.
2.
, the fluid mass density.
9.9–1
ABAQUS Version 6.1 Module:
ID:
Printed on: