Filter
Top Products
*
INCREMENTATION OUTPUT
9.15
*
INCREMENTATION OUTPUT: De fine output database requests for time
incrementation data.
This option is used to write increm entation variables to the output database. It must be used in conjunction
with the
*
OUTPUT, HISTORY option.
Product: ABAQUS/Explicit
Type: History data
Level: Step
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
• *
OUTPUT
Optional parameter:
VARIABLE
Set VARIABLE=ALL to indicate that all incrementation variables applicable to this procedure type
should be written to the output database.
Set VARIABLE=PRESELECT to indicate that the default incrementatio n output variables for
the curre nt pro cedure type s hould be written to the output database. Additional outp ut variable s can
be requested on the data lines .
If this parameter is omitted , the inc rementation variables requested for output must be specified
onthedatalines.
Data lines to request incrementation output:
First line:
1. Give the identifying keys for the variables to be written to the output database. The
keys are defined in “ABAQUS/Explicit output variable identifiers,” Section 4.2.2 of the
ABAQUS Analysis User’s Manual.
Repeat this data line as often as necessar y to define the time incrementation variables to be written to
the output database.
9.15–1
ABAQUS Version 6.1 Module:
ID:
Printed on: