3D Connexion Version 6.6 Two-Way Radio User Manual


 
*
SFILM
The FILM AMPLITUDE parameter is ignored if a nonuniform film coefficient is defined in
user subroutine FILM or if a film coefficient is defined to be a function of temperature and field
variables using the
*
FILM PROPERTY option.
OP
Set OP=MOD (default) to modify existing films or to define additional films.
Set OP=NEW if all existing
*
SFILMs applied to the m odel should be removed.
Data lines to define sink temperatures and film coefficients:
First line:
1. Surface name.
2. Film type label F or FNU.
3. Reference sink temperature value,
. (Units of .) For nonuniform film coefficients the s ink
temperature must be defined in user subroutine FILM. If given, this value w ill be passed into
the user subroutine.
4. Reference film coefficient value, h (units of JT
−1
L
−2 −1
), or name of the film property table
defined with the
*
FILM PROPERTY option. Nonuniform film coefficients must be defined in
user subroutine FILM. If given, this value will be passed into the user subroutine.
Repeat this data line as often as necessary to define film conditions for different surfaces.
18.8–2
ABAQUS Version 6.1 Module:
ID:
Printed on: