3D Connexion Version 6.6 Two-Way Radio User Manual


 
*
SUBSTRUCTURE MATRIX OUTPUT
18.43
*
SUBSTRUCTURE MATRIX OUTPUT: Write a substructure’s recovery matrix,
reduced stiffness matrix, mass matrix, load case vectors, and gravity load vectors
to a file.
This option is used to write a substructure’s recovery m atrix, reduced stiffness matrix, mass matrix, load case
vectors, and gravity load vectors to a file. It can be used only in a
*
SUBSTRUCTURE GENERATE analysis.
Product: ABAQUS/Standard
Type: History data
Level: This option is not supported in a model defined in terms of an asse mbly of part instances.
Reference:
“Defining substructures,” Section 10.1.2 of the ABA QUS Analysis User’s Manual
Optional parameters:
FILE N AME
This parameter is intended for use with OUTP UT FILE= USER DEFINED.
Set this parameter equal to the na me of the file (without an extension) to which the data will be
written. The extension .mtx will be added to the file name provided by the user; see “Input syntax
rules,” Section 1.2.1 of the ABAQUS Analysis User’s Manual, for the syntax of such file names.
If the OUTPUT FILE parameter is om itted or set equal to RESULTS FILE, use of the FILE
NAME parameter overrides the OUTPUT FILE setting; the data will be written to the named file,
not to the results (.fil) file. If OUTPUT FILE=ODB, the FILE NA ME parameter is ignored and
the data will be written to the output database (.odb) file.
GRAVITY LOAD
Set GRAVITY LOAD=YES t o write the substructure gravity load vectors (only available if the
gravity load vectors are requested with the
*
SUBSTRUCTURE GENERATE option). The default
is GRAVITY LOAD=NO.
MASS
Set MASS=YES to write thesubstructure mass matrix (only available ifthe mass m atrix is requested
with the
*
SUBSTRUCTURE GENERATE option). The default is MASS=N O.
OUTPUT FILE
Set OUTPUT FILE=RESU LTS FILE (defa ult) to write the data to the results (.fil) file in the
format specified in “Results file output format,” Section 5.1.2 of the ABAQUS Analysis User’s
Manual.
18.43–1
ABAQUS Version 6.1 Module:
ID:
Printed on: