3D Connexion Version 6.6 Two-Way Radio User Manual


 
*
PERIODIC
16.5
*
PERIODIC: Define periodic symmetry for a cavity radiation heat transfer analysis.
This option is used to define cavity symmetry by periodic repetition in a given direction. It can be used only
following the
*
RADIATION SYMMETRY option.
Product: ABAQUS/Standard
Type: History data
Level: Step
References:
“Cavity radiation,” Section 32.1.1 of the ABAQUS Analysis User’s Manual
*
RADIATION SYMMETRY
Required parameter:
TYPE
Set TYPE=2D to create a cavity composed of the cavity surface defined in the model and a series
of similar images generated by its repetition according to a two-dimensional distance vector. The
repeated images are bounded by lines parallel to line
(see Figure 16.5–1). The distance vector
must be defined so that it points away from line
and into the domain of the model. This option
can be used only for two-dimensional cases.
Set TYPE=3D to create a cavity composed of the cavity surface defined in the model and a
series of sim ilar images generated by its repetition according to a three-dimensional distance vector.
The repeated im ages are bounded by planes parallel to plane
(see Figure 16.5–2). The distance
vector must be defined so that it points away from plane
and into the domain of the model. This
option can be used only for three- dimensional cases.
Set TYPE=ZDIR to create a cavity composed of the cavity surface defined in the model and
a series of similar images generated by its repetition in the z-direction. The repeated images are
bounded by lines of constant z-coordinate (see Figure 16.5–3). The z-distance vector must be
defined so that it points away from the z-constant periodic symmetry reference line and into the
domain of t he model. This option can be used only for axisymmetric case s.
Optional parameter:
NR
Set this parameter equal to the number of repetitions used in the numerical calculation of the cavity
viewfactors resulting from the periodic symm etry. The result of this sym metry is a cavity com posed
of the cavity surface defined in the modelplus twice NR similar images, since the periodic symm etry
16.5–1
ABAQUS Version 6.1 Module:
ID:
Printed on: