Filter
Top Products
*
RESPONSE SPECTRUM
4. Z-direction cosine of this direction.
5. Factor multiplying th e magnitudes in the response spectrum. Default is 1.0.
Second line (optional):
1. Name of the response spectrum to be used in the second direction.
2. X-direction cosine of this direction. This direction must be at a right angle to the direction
defined above.
3. Y-direction cosine of this direction. This direction must be at a right angle to the direction
defined above.
4. Z-direction cosine of this direction. This direction must be at a right angle to the direction
defined above.
5. Factor multiplying th e magnitudes in the response spectrum. Default is 1.0.
Third line (optional):
1. Name of the response spectrum to be us ed in the third dire ction.
2. X-direction cosine of this direction. This direction must be at right angles to the two directions
defined above.
3. Y-direction cosine of this direction. This direction must be at right angles to the tw o directions
defined above.
4. Z-direction cosi ne of this direction. This direct ion must be at right angles to the two directions
defined above.
5. Factor multiplying th e magnitudes in the response spectrum. Default is 1.0.
17.14–2
ABAQUS Version 6.1 Module:
ID:
Printed on: