3D Connexion Version 6.6 Two-Way Radio User Manual


 
*
RIGID SURFACE
Third line:
1. The “word” STA RT.
2. Local x-coordinate of the st arting point of the line segments.
3. Local y-coordinate of the starting point of the line segments.
Fourth and subsequent data lines define the various line, circular, and parabolic segments (see below
for their format) that form the profile of the rigid surface.
Data lines to define surfaces created with TYPE=REVOLUTION:
First line:
1. Global X-coordinate of point a, the origin of the local system (see Figur e 17.19–2).
2. Global Y-coordinate of poi nt a, the origin of the local
system.
3. Global Z-coordinate of point a, the origin of the local
system.
4. Global X-coordinate of point b on the symmetry axis (the local z-axis).
5. Global Y-coordinate of point b on the symmetry axis (the local z-axis).
6. Global Z-coordinate of point b on the symmetry axis (the local z-axis).
Second line:
1. The “word” STA RT.
2. Local r-coordinate of the starting point of the line segments.
3. Local z-coordinate of the starting point of the line segments.
Third and subsequent data lines define the various line, circular, and parabolic segm ents (see below
for their format) that form the profile of the rigid surface.
Data lines that define the line segments that form the rigid surface for TYPE=SEGMENTS,
TYPE=CYLINDER, and TYPE=REVOLUTION:
Data line to define a straight line segment:
1. The “word” LINE.
2. x-coordinate of the endpoint of the line.
3. y-coordinate of the endpoint of the line.
Data line to define a circular arc segment (the arc mus t be less than 180°):
1. The “word” CIRCL.
2. x-coordinate of the endpoint of the circular arc.
3. y-coordinate of the endpoint of the circular arc.
4. x-coordinate of the center (origin) of the circular arc.
5. y-coordinate of the center (origin) of the circular arc.
17.19–3
ABAQUS Version 6.1 Module:
ID:
Printed on: