Filter
Top Products
*
OUTPUT
15.3
*
OUTPUT: Define output requests to the output database .
This option is used to write contact, element, energy, nodal, or diagnostic output to the output datab ase. In
an ABAQ US/Standard analysis it is also used to write m odal or radiation output to the output database. In
an ABAQUS/Explicit analysis it is also used to write incrementation output to the output databas e. The
*
CONTACT OUTPUT,
*
ELEMENT OUTPUT,
*
ENERGY OUTPUT,
*
INCREMENTATION OUTPUT,
*
MODAL OUTPUT,
*
NODE OUTPUT, and/or
*
RADIATION OUTPUT options can be used in conjunction
with this option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: History data
Level: Step
Using
*
OUTPUT in an ABAQUS/Standard analysis
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
“ABAQUS/Standard output variable identifiers,” Section 4.2.1 of the ABAQUS Analysis User ’s Manual
•
“Overview of job diagnostics,” Section 23.1 of the ABAQ US/CAE User’s Manual
• *
CONTACT OUTPUT
• *
ELEMENT OUTPUT
• *
ENERGY OUTPUT
• *
MODAL OUTPUT
• *
NODE OUTPUT
• *
RADIATION OUTPUT
• *
TIME POINTS
One of the following mutually exclusive parameters is required:
DIAGNOSTICS
Set DIAGNOSTICS=YES (default) to indicate that detailed diagnostic information should be
written to the output database. Set DIAGNOSTICS=NO to suppress the output.
FIELD
Include this parameter to indicate that the output requests used in conjunction with the
*
OUTPUT
option will b e written to the output databa se as field-type output.
15.3–1
ABAQUS Version 6.1 Module:
ID:
Printed on: