Filter
Top Products
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-32-
TABLE RM-Z
PROGRAM 32
AUTOMATIC PREFERENCE
1 >MODE PROG
Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
ACTION
STEP
DISPLAY/PRINTOUT
2 P 32
P32
Enter the Program Number 32
3 P32 01Refer to the record sheet and enter the required port number.
4 P32 01# 100
Press CR.
5 P32 01 # 100 0
Refer to the record sheet and enter the required
ringing code. Example: Code 0, enter 0.
7 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all Program 32 data
is entered.
C) To exit this program, press # # CR.
6 P32 01# 100 011Refer to the record sheet and enter the required
automatic off-hook code. Example: Code 11, enter 1 1.
P32 01# 100 011
P32 ##
P
P
Example: Port 01, enter 0 1.
Enter #. The present status for this port will be displayed.
TABLE RM-AA
PROGRAM 33
STATION HUNTING
ACTIONSTEP DISPLAY/PRINTOUT
1 >MODE PROGEnter the Program Mode
At the >MODE prompt, enter P R O G CR.
2
P 33
P33
Enter Program Number 33
Press CR.
3 P33 03Refer to the record sheet and enter the required
port number.
Example: Port 03, enter 0 3.
4 Enter #. The present data will be displayed.
P33 03# NN
5 Refer to the record sheet and enter the port number
that will be the hunt point.
Example: Port 00, enter 0 0.
6
P33 03# NN 00
P33 ##
P
To Exit Program/Store Data
A)
B)
C)
P
P33 03# NN 00
To store data, press CR.
Continue returning to step 3 until all Program 33
data is entered.
To exit this program, press # # CR.