Filter
Top Products
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-2-
data base programs, including Speed Dial num-
bers and LCD messages.
Message Mode: Provides for sending, adding, or
changing digital and electronic telephone LCD
messages.
Speed Dial Mode: Allows Station and System
Speed Dial numbers to be programmed remotely.
NOTE:
All the functions in the preceding paragraphs
are also available via an on-site terminal con-
nected directly to an optional PIOU(S) PCB
with DK16, or the optional QSMU PCB with
DK8. These functions are also available to a
terminal with a modem connected to a stan-
dard telephone port (Paragraph 5 and Figure
5).
2.04 There are two levels of Remote Administra-
tion and Maintenance.
Level 1: Allows access to all programs.
Level 2: Allows access to Programs 30 ~ 39 and
77 ~ 89, which pertain only to individual station
options such as button assignments, class of
service, etc.
2.05 Each Remote Administration and Mainte-
nance level has a different programmable pass-
word for customer data base protection. This al-
lows a customer to make certain station moves,
adds, and changes in Level 2; while protecting the
critical system assignments in Level 1 (refer to
Program 00).
3 HARDWARE REQUIREMENTS
3.01 For Remote Administration and Maintenance
operation, the STRATA DK16 system must be
configured with either an IMDU-equipped PIOU(S)
PCB in the optional Expansion Unit or an external
modem connected to a PIOUS(S) and a dedicated
CO line or standard telephone circuit. (See Figures
2, 3, and 4.) The STRATA DK8 must be configured
with a QSMU PCB and an external modem con-
nected to a dedicated CO line or standard tele-
phone circuit. (See Figures 2 and 3.)
2 GENERAL DESCRIPTION
2.01 With the STRATA DK8, Remote Adminis-
tration and Maintenance is accomplished with a
remote terminal/modem communicating over the
public telephone network, but only via an exter-
nal modem connected to a dedicated CO line or
standard telephone port. See Figures 2 and 3.
With STRATA DK16 Remote Administration and
Maintenance is accomplished with a remote ter-
minal/modem communicating over the public
telephone network via either an external modem
(connected to a dedicated CO line or a standard
telephone port); or, a modem unit (IMDU) in-
stalled on a PIOU or PIOUS PCB in the Expan-
sion Unit. See Figures 2, 3 and 4.
2.02 Remote Administration and Maintenance calls
with the STRATA DK16 may connect to the IMDU
automatically via programmable CO line ringing
assignments (Program 81 ~ 89) or Direct Inward
System Access (DISA) CO lines (Program 78), or
manually via the standard call transfer feature to
intercom number 619. Automatic connection and
DISA allow remote programming to be accom-
plished after business hours without on-site assis-
tance. Remote Administration calls with the DK8 or
the DK16 via an external modem connected di-
rectly to a CO line (instead of an IMDU) connect to
the external modem automatically without any spe-
cial station or CO line ringing assignments. When
the external modem is connected to a standard
telephone port, the call transfer feature, DISA, and
ringing assignments can be utilized to access the
Remote Administration.
2.03 Remote Administration and Maintenance al-
lows the following functions to be accomplished
remotely:
Program Mode: Provides for complete program-
ming of all STRATA DK8 or DK16 programs.
Test Mode: Provides for testing of STRATA DK8 or
DK16 CO lines and stations.
Data Dump Mode: Provides a complete printout of
all or individual STRATA DK8 or DK16 customer