INSTALLATION-PERIPHERALS
SECTION 100-816-207
MARCH 1993
7-26
FIGURE 7-19
DK8 AND DK16 SMDR PRINTOUT EXAMPLES
01 15 08:14 00:00;22
01 MODM 08:15 00:00;18
03 10 08:16 00:00;28
03 DISA 08:16 00:00;15
01 DISA 08:17 00:00;25
03 MSS 08:18 00:00;12
03 15 08:19 00:00;22
03* 12 08:19 00:00;16
04 10 08:20 00:00;34
02 10 08:22 00:00;22
01 15 08:23 00:00;40
<DD/MM/YY, EVERY FIFTY CALL RECORDS AND AT MIDNIGHT>
00;00
00;08 12
00;06 15
123456987
12345678912345678965412365
7145833700
7145833700
456789
123456789456321
(FC: 35-60)
(FC: 62-76)
(FC: 30-33)
(FC: 24-28)
(FC: 15-22)
(FC: 9-13)
(FC: 4-7)
Field Column (FC: 1-2)
Account Code
(4~15 digits)
Outgoing Telephone Number (1~26 digits)
Station to which the CO Line was transferred (1~4 digits)
Time of Day (HH:MM; hour and minute the call was released)
Call Duration (HH:MM:SS, see Note 1)
Station Number (1~4 digits; see Note 2)
CO Line Incoming Ring Duration Before Answer (MM:SS)
CO Line Number (01~36)
NOTES:
1.
2.
3.
4.
5.
6.
*
3
<DISA CALL TO IMDU>
<OUTGOING DISA ACCESS BY INCOMING DISA 01>
<INCOMING DISA AND ACCESS CO 03 OUTGOING>
<05 ANSWERS DISA CALL 12 SECONDS AFTER DK DIAL TONE>
07/06/90
First Digit (varies) Last (always this column)
First Digit (varies) Last
6
3
3
3
3
3
3
3
Call Duration (incoming, outgoing, or transfer) can be 1.0 or 10 seconds (minimum) to generate a call record
printout (see Program 60-2).
“MSS”: designates a Direct Inward System Access (DISA) CO call to a station that is not answered; or, answered
after 1.0 or 10 seconds (depending on Program 60-2). DISA calls always register 05 ~ 06 seconds ring before
answer duration time.
“MODM”: designates a call to the IMDU, Remote Maintenance Modem.
“DISA”: designates a DISA call thru the system via CO to CO connection.
Field column information is provided for SMDR output formatting purposes.
The call record data is ASCII-formatted, 8 bits; no parity, 1-stop bit.
Special dial printout:
Tone = "T"
Long pause = "L"
Flash = "F"
Pause = "P"
The "
*
" indicates that the call was disconnected by the Central Office Calling Party Control (CPC) or Automatic
Release (AR) signal. CO lines must have Programs 15-0 and 15-3 enabled to be dropped by the CPC signal.
12