Filter
Top Products
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-29-
TABLE RM-U
PROGRAM 19
BACKGROUND MUSIC SLOT IDENTIFICATION
ACTIONSTEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 19
P19
Enter Program Number 19
3 P19
P19 1 NN
Enter the number 1.
The present slot number will be displayed.
Press CR.
4 P19 1 NN 04
P19
Refer to the record sheet and enter the required slot number.
Example: Slot 04, enter 0 4 CR.
5 P1 19 ##
P
To Exit this Program
Press # # CR.
NOTE:
Pro
g
ram 20
uses T
y
pe 2 procedure.
TABLE RM-V
PROGRAM 21
MODEM POOLING
ACTIONSTEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 21
P21
Enter Program Number 21
3 P21 04
Refer to the System Record Sheet, and enter the required port
number for the PDIU-DS.
Example: port 04; Enter: 0 4.
Press CR.
6 P21 04 # NN 08
P21 ##
P
To Exit Program/Store Data
A)
B)
C)
To store data, press CR.
Continue returning to Step 3 until all Program 21 data
is entered.
To exit this program, press # # CR.
4 P21 04 # NNPress #.
The system will display the presently selected standard telephone
port number.
5 P21 04 # NN 08Refer to the System Record Sheet, and enter the required
standard telephone port number.
Example: Port 08; Enter: 0 8.