Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
until the desired mode appears
[
Outgoing : On __ to print outgoing calls __ default
Outgoing : Off __ to stop printing
, . . . .
until the desired mode appears
[
Incoming : On
__ to print incoming calls __ default
Incoming : Off __ to stop printing
00ti00~0~
25 NEXT SELECT MEMORY NEXT SELECT MEMORY END
Description
4.
It is possible to print outgoing calls or
.
incoming calls or both.
5.
Programming
1.
2.
3.
Dial (25).
“Duration Log” will be displayed.
Press the NEXT button.
“Outgoing : On” will be displayed and the
“On” will blink.
6.
7.
Press the SELECT button to alternate between
the “On” and” Off” to select the desired
mode.
8.
-
Press the MEMORY button.
The LCD will stop blinking.
Press the NEXT button.
“Incoming : On” will be displayed and the
“On” will blink.
Press the SELECT button to alternate between
“On” and “Off” to select the desired mode.
Press the MEMORY button.
The LCD will stop blinking.
To return to the initial program mode, press
the END button.
Programming Table
See page 7-8.
,.............................
until the desired mode appears
I
I
Description
’
Enables programming to print out secret dialing
numbers, even though these secret numbers are
not displayed on the LCD during speed dialing
(“System Speed Dialing Entry” on page 3-5) or
one-touch dialing (on page 4-4) are used.
Programming
1.
Dial (26)
“Secret Printing” will be displayed.
2. Press the NEXT button.
“No Printing” will be displayed and blink.
3. Press the SELECT button to:alternate
between “No Printing”’ and “Printing” to
select the desired mode.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
Programming Table:
See page 7-a.
3-36