Filter
Top Products
~.~......~~.~........“‘..‘.‘.’ until the desired memory number (01 through 20) appears
: ........................
CDE =
exchange
co& with
3
digits
Nothing is stored
......... default (all 20 memory numbers)
. AB=pi/il:
memory number 01 for storage of.exchange code
: memory number 20
for storage of exchange code
Description
For Service Class 5 (See “Toll Restriction” on
page 3-17), up to 20 exchange codes can be
selected for use in local dialing (charged).
All exchange codes except those entered will
be denied.
All extensions programmed for Service Class
Selections 5 are assigned to the same exchange
code selection plan.
Programming
1.
Dial (15).
“Cls-5 Local Code” will be displayed.
2. Press the NEXT button.
“Local NO ? -+ ” will be displayed.
3. Dial the memory number (01 through 20)
or press the NEXT button.
Example:
When dialing (01) or pressing the NEXT
button.
l
The LCD will show “Local 01 : --.” when
nothing is stored in memory number
“01 “.
When exchange code 392 has been
stored, “Local 01 : 392” will be
displayed.
4. Dial the exchange code, using 3 digits.
l
To erase a wrong entry, press the CLEAR
button.
5. Press the MEMORY button.
l
The memory indicator will be lit.
6.
l
To advance to the next memory number,
press the NEXT button.
l
To return to the previous memory number,
press the PREV button.
l
To go to the desired memory number,
press the SELECT button and then dial the
memory number.
7. Repeat steps 4 to 6.
8. To return to the initial program mode, press
the END button.
Programming Table.
See page
7-6.
3-23