Filter
Top Products
;...“.‘........ until the desired jack number (01 through 32)appears.
i........‘.‘.‘.‘............ until the desired mode appears
Option
.-.=*.....’ default(all 32 jack numbers)
Forced
J
:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
: to assign the same on at132 jack numbers
Description
This feature gives each message of the SMDR
to an account code of the called or calling party.
This feature has two modes “Forced” and
“Option” .In the “Forced” mode, the account
code must be entered every time extension
user dials.
In the “Option” mode, the account code may
be entered when a record is needed. Refer to
“Account Code” page 4-46.
Programming
Dial (64).
1.
2.
3.
4.
“Call Accounting” will be displayed.
Press the NEXT button.
‘*Jack NO?+” will be displayed.
Press the NEXT button or dial the jack
number (01 through 32).
WOl : Option” will be displayed and the
x
jack number
“Option” will blink.
Press the SELECT button to alternate
between “Option” and “Forced” to select
the desired mode.
5. Press the MEMORY button.
The LCD will stop blinking.
6.
l
To advance to the next jack number,
press the NEXT button.
l
To return to the previous jack number,
press the PREV button.
l
To go to the desired jack number,
press the SELECT button and then dial
the jack number.
7. Repeat steps 4 to 6, to program the account
code of the other jack numbers.
8. To return to the initial program mode, press
the END button.
Programming Table
_
See page 7-26.
3-71