Filter
Top Products
Description
11.
Press the MEMORY button.
If you select the automatic switching mode for day/
night service, enter the starting time.
Starting time can be programed for every day of the
week. Refer to “Switching of Service Mode (Day/Night
Service Mode)” on page 3-12.
The LCD will stop blinking.
12.
Press the SELECT button.
“Night: 500 PM” or “Night: None” will be
displayed as the default value and “Night” will
blink.
Press the “q” button.
“5” or “None” will blink.
0 If “Night: None” will be displayed, press the
SELECT button.
Programming
1.
Dial (07).
“Day/Night Time” will be displayed.
2. Press the NEXT button.
“Day of The Week” will be displayed.
3. Press the NEXT button.
“Sunday” will be displayed.
0 To advance to the next day.
Press the NEXT button.
0 To return to the previous day.
Press the PREV button.
4. Press the SELECT button.
“Day: 9:00 AM” or “Day: None” will be
displayed as the default value and “Day” will
blink.
5. Press the “e” button.
“9” or “None” will blink.
l
If “Day: None” is displayed, press the
SELECT button.
“Day: 9:00 AM” will be displayed.
8. Enter the starting hour for day service using 1
or 2 digits.
l
To set a same mode as last night mode,
press the SELECT button and then proceed
to step 11. :
19.
20.
21.
22.
Press the MEMORY button.
The LCD will stop blinking.
e To advance to the next day of the week, press
the NEXT button.
0 To return to the previous day of the week,
press the PREV button.
Repeat steps 4 to 20 to program the starting
times for each day of the week.
l
To erase a wrong entry, press the CLEAR
button.
To return to the initial program mode, press the
END button.
7. Press the “ 9” button.
Programming Table
“00” will blink.
See page
7-4.
8. Enter the minutes using 2 digits.
9.
Press
the LL G”
button.
“AM"
will blink.
13.
14.
15.
18.
17.
18.
“Night: 500 PM” will be displayed.
Enter the starting time for night service using 1
or 2 digits.
0 To set a same mode as last day made, press
the SELECT button,and then proceed to step
19.
Press the I‘ a ” button.
“00” will blink.
Enter the minutes using 2 digits.
Press the “+‘I button.
“PM” will blink.
Press the SELECT button*to alternate between
“AM” and “PM” to select the correct setting.
10.
Press the SELECT button to alternate between
“AM” and “PM” to select the correct setting.
3-14