Filter
Top Products
until the desired mode appears
..................
Description
Programming
’
If a call is transferred to an extension, and the
other extension does not answer the transferred
call within 30 seconds, the call will return to you.
The time may be changed to 2 minutes.
Refer to “Call Transfer-To Extension” on page 4- 18.
1.
2.
3.
4.
5.
Dial (19).
“Transfer Recall” will be displayed.
Press NEXT button.
“Time: 30 set” will be displayed and the “30”
will blink.
Press the SELECT button to alternate between
“2 min” and “30 set” to select the desired
mode.
Press the MEMORY button.
The LCD will stop blinking.
To return to the initial program mode, press
the END button.
Programming Table
See page 7-6.
3-27