Filter
Top Products
,..............until the desired external paging equipment number (1 or 2) appears
I
_........................... , until
the-desired mode appears
Enable-
. ..-...default (external pagingj and 2)
Disable
=&
Description
6. Repeat steps 3 to 5, to program the access tone
The acknowledge tone that is heard after
accessing the external paging equipment can be
removed or added at the customer’s request.
Refer to “Paging-External” on page 4-25.
Programming
1.
2.
3.
4.
5.
Dial (29).
“Ext-Pag Ack-Tone” will be displayed.
Press the NEXT button.
“Pag NO?+” will be displayed.
Press the NEXT button.
“Pag 1: Enable” will be displayed and
“Enable” will blink.
of the other external paging equipment.
7. To return to the initial program mode, press
the END button.
Example:
To eliminate the access paging tone on external
paging 1.
piqiEElINEXTIJSELECTIIMEMORY[
Press the SELECT button to alternate between
“Enable” and “Disable” to select the desired
mode.
Press the MEMORY button.
The LCD will stop blinking.
Programming Table
See page 7-9.
3-41