Filter
Top Products
: ..........................
until the desired mode appears
Man ....... .-Day/Night service is manually switched .......
default
Auto
.........
Day/ Night service is automatically switched
:.
pjc-lmNEXTllSELECTlfi1
.
Description
Allows Day/Night service to be selected
manually or automatically.
Programming
1.
Dial (06).
“Day/Night Mode” will be displayed.
In case of manual switching, refer to “Flexible
Night Service” on page 4-38.
In case of automatic switching, set the “Starting
Time (Day/Night Service mode)” on page 3-13.
The following features will be switched
Day mode or Night mode.
2.
3.
Press the NEXT button.
“Mode Change : Man” will be displayed
and “Man” will blink.
Press the SELECT button to alternate
between “Man” and “Auto” to select the
l
“Flexible Outward Dialing Assignment” on
page 3-53.
desired mode.
l
“Flexible Ringing Assignment”
4.
Press the MEMORY button.
The LCD will stop blinking.
on page 3-54.
l
“Delayed Ringing Assignment” on page 3-56.
5. To return to the initial program mode, press
the END button.
l
‘CO Mode (Normal/Direct In Line/Direct Inward
System Access) Assignment” on page 3-57.
l
‘Service Class Assignment of Toll Restriction”
on page 3-67.
0 “Ringing Assignment of Doorphone” on
page 3-76.
Conditions
When the Switching of Service Mode (Day/Night
Service Mode) is set to”Auto”, the present
Day/ Night Service mode will not change after
you finish programming.To change the present
mode,manual operation is required. After you
select the Starting time (Day/Night Service Mode)
on page 3-l 3, select the present Day/Night mode
by “Flexible Night Service” on page 4-38.
Programming Table
See page 7-4.
,
3-12