Filter
Top Products
Station Programming
To Program
l
Be sure the handset is in the cradle and the SP-PHONE button is off.
l
Set the MEMORY switch of the proprietary telephone to “PROGRAM”.
Paging All Extensions (Dial 330).
Press
Dial “330”
Press
PROGRAMMABLE
MEMORY
.._..._...
FEATURE
After programming all the system features, return the MEMORY switch to the “SET” position.
To Access
I
I
I
I
__
I
-r
Lift handset Press
Confirmation Page
or press
PROGRAMMABLE tone of 1 beep
SP-PHONE FEATURE
will be heard
Description
Features that can be accessed by using the
dialing button also can be programmed into
memory.
(e.g. Paging All Extensions.)
Operation
To Program
To Access
1. Lift the handset or press the
“SP-PHONE” button.
2. Press the PROGRAMMABLE FEATURE
button and wait for confirmation tone
(one beep).
3. Start paging
.
Set the MEMORY switch of the proprietary
telephone to “PROGRAM”.
“PITS-PGM NO ?-” will be displayed.
Example:
Paging All Extensions (Dial 330).
1. Press the PROGRAMMABLE FEATURE
button.
2. Dial (330).
3. Press MEMORY button.
0 System feature described in the table on
page 6-5 can be programmed into
memory.
After programming all the numbers, return
the MEMORY switch to the “SET” position.
4-52