Filter
Top Products
Receiving Calls
or
Lift Press
handset
SP-PHONE
Operation
Lift the handset or press the SP-PHONE
button.
l
When receiving an intercom call, you may press
the ICM button whose indicator is flashing quickly
and talk. (Hands-free mode)
l
When receiving an outside call, you may press
the CO button whose indicator is flashing red
quickly and talk.(Hands-free mode)
l
When the “Automatic Answering Selection”
feature (on page 4-56) is selected “No Line
Preference-Incoming” in the extension and
outside call reaches, lift the handset and then
press the CO button whose indicator is flashing
(red color) quickly.
l
When the “Automatic Answering Selection”
feature (on page 4-55) is selected “Prime Line
Preference-Incoming” in the extension and any
incoming calls from the Central Office are
received at the same time except preferred CO
line, you must lift the handset and then press
the CO button whose indicator is flashing (red
color) quickly. _
Conditions
An extension can not receive the call through the CO
line which is not assigned to the CO button. Therefore,
if the extension user wants to receive the CO call, the
CO line is required to be assigned to the CO button.
To assign the CO line to the CO button, there are 3
ways as follows.
l
Way to change into other CO button
(on page 4-57)
l
Way to assign to trunk group access button
(on page 4-57)
l
Way to change into other all CO numbers which
are not assigned to CO button.(on page 4-59)
4-10
Setting
To cancel
‘be lit)
Description
Allows an extension user to answer an intercom
call in the automatic hands-free mode without
any operation when receiving an intercom call.
Operation
1.
For setting, press the AUTO ANS button.
The AUTO ANS indicator will be lit.
2. For cancellation, press the AUTO ANS button
again.
The AUTO ANS indicator will go out.
Conditions
l
This feature is required to be set beforehand
while the unit is not in use.
l
The KX-T123250, KX-T61650 or KX-T30850
will not function for Automatic Answer.