Filter
Top Products
Doorphone Feature
_........................,............
until the desired doorphone number (1 or 2) appears’
,...............................,...................
until the desired jack number appears
m : on jack number 01
m : on jack number 32
m : to assign the same on all 32 jacks
until the desired mode appears
. . ;)
-------ea.default (all 32 jack numbers)
Description
Allows each extension to be programmed for
receiving calls from up to 2 doorphones during
the day or night mode.
(Doorphone is an option.)
Programming
l
Dial (70) for day mode.
“Day Door Phone” will be displayed.
l
Dial (71) for night
mode.
“Night Door Phone” will be displayed.
Press the NEXT button.
“Door NO ? +” will be displayed.
Press the NEXT button or dial the doorphone 9. Repeat steps 3 to 8, to program the assignment
1.
.2.
3.
4.
5.
number (1 or 2).
“DP-1:~Enable” will be displayed.
jack number
Repeat pressing the m button until the
desired jack number appears, or press the
q
button and then dial the jack number.
Press the SELECT button to alternate between
“Enable” and “Disable” to select the desired
mode.
6. Press the MEMORY button.
The LCD will stop blinking.
7.
l
To advance to the next jack number,
press the m button.
l
To return to the previous jack number,
press the m button.
l
To go to the desired jack number,
press the
q
button and then dial the
jack number.
6. Repeat steps 5 to 7, to program the assignment
of the other jack numbers.
of the another doorphone.
10.
To return to the initial program mode, press the
END button.
Programming Table
’
See pages 7-28 and 7-29.