Filter
Top Products
For installing the doorphone, use the Optional Doorphone Adaptor (Use the KX-T30860D only).
Installation of the doorphone Installqtion of the Doorphone Adaptor
Loosen the screw to
separate the
doorphone into 2
halves.
How to install the Doorphone Adaptor into the
KX-Tl23211.
1.
Connect a 4-conductor modular connector to
the doorphone adaptor.
Install the lower case
to the wall with 2
screws.
l
2 kinds of screws
are included. Please
choose according to
your wall type. See
the followings.
doorphone adaptor (KX-T30860D)
4-conductor wiring
been fixed to the wall.
w-------When you wish to install the
doorphone directly to the wall.
2.
3. Connect the wires
from the terminal
box to the screws
located in the
upper case.
to the terminal box
(See page 2-34)
4. Secure both halves together and ,re-install the
screw.
3.
Install the doorphone adaptor into the
adaptor compartment.
After drawing a CPU Card, insert the adaptor
connector into connector on the CPU Card
(circuit board).
Adaptor Connector
Connector CPU Card
2-33