Filter
Top Products
_
Setting
I
I
Lift handset
or press
SP-PHONE
Dial “4”
cl
#
Dial “#”
Hang up or
press
SP-PHONE
To cancel
Lift handset
or press
SP-PHONE
Press
FWD/ DND
(F3)
Dial “0”
Dial “#” Hang up or
press
SP-PHONE
Description
To cancel
Each extension can be individually programmed
for not receiving intercom call or outside calls.
The programmable feature (F3 only) button of the
KX-T123250, KX-T61650, KX-T39825 or
KX-T30850 can also be used for “Do Not Disturb”
if programming is done beforehand in the
extension.
1.
Lift the handset or press the SP-PHONE
button.
The indicator of FWD/ DND button will go
out.
2. Press the FWD/DND (or F3) button.
3. Dial (0).
4. Dial (ti).
For programming, see page 4-65.
“FWDIDND Cancel” will be displayed.
Wait for a confirmation tone.
5. Hang up or press the SP-PHONE button.
Operation
Setting
1.
Lift the handset or press the SP-PHONE
button.
2. Press the FWD/ DND (or F3) button.
3.
Dial (4).
4. Dial (#).
0
0
“Do Not Disturb” will be displayed.
Wait for a confirmation tone.
5. Hang up or press the SP-PHONE button.
The indicator of FWD/DND button will be
lit.
0
Conditions
When “Do Not Disturb” is entered, ‘CaTI
Forwarding” will be canceled.
“Do Not Disturb” does not prevent the
extension from recalling for on-hold and
camp-on.
If calling party use the “Do Not Disturb
Override” feature, the call will receive the
extension that is setting the “Do Not
.
Disturb”.
r
See the “Do Not Disturb Override” on page
4-32.
4-31