Filter
Top Products
To Change into DSS Button
To Change into One Touch Dialing Button
Setting
l
Be sure the handset is in the cradle and the
SP-PHONE button is off.
l
Set the MEMORY switch of the proprietary
telephone to
“PROGRAM”.
l
Be sure the handset is in the cradle and the
SP-PHONE button is off.
0 Set the MEMORY switch of the proprietary
telephone to
“PROGRAM”.
which you extension MEMORY
want to number
change into
DSS button
(100 throughl99)
l
After programming all CO buttons, return
the MEMORY switch to the
“SET”
position.
Dialing (Inter Office Calling)
0
F&I
which you want to
cnange Into
one touch
dialina
p ho?e
numoer
AUTO
n
m
MEMORY
I
I
Press
MEMORY
0
You may dial 81 through
88 instead of 9.
Lift handset
or press
SP-PHONE
Press CO
which has
been changed
into DSS
l
After programming all CO buttons, return
the MEMORY switch to the
“SET”
position.
Iescription
Description
Allows each CO button to change into the DSS
(Direct Station Selection) button.
DSS button can be used instead of dialing a
extension number.
Operation
Setting
0
0
1.
2.
3.
4.
0
Be sure the handset is in the cradle and the
SP-PHONE button is off.
Set the MEMORY switch of the proprietary
telephone to
“PROGRAM”.
Press the CO button which you want to change
into DSS button.
When pressing CO 1 button,
“CO-01” will be-displayed.
Dial (1).
“EXT-
” will be displayed.
Dial the extension number (100 through 199).
When dialing (120),
“EXT-120” will be displayed.
Press the MEMORY button.
After programming all CO buttons, return the
MEMORY switch to the
“SET”
position.
Dialing (Inter Office Calling)
1.
Lift the handset or press the SP-PHONE button.
2. Press the CO button which has been changed into
DSS.
4-58
Allows each CO button to change into the one
touch dialing button.
Up to 16 digits can be stored into each of the 12
CO buttons.
Operation
l
Be sure the handset is in the cradle and the
SP-PHONE button is off.
l
Set the MEMORY switch of the proprietary
telephone to
“PROGRAMED.
1.
Press the CO button which you want to
change into one touch dialing .
When pressing CO 1 button, “CO-01” will
be displayed.
2. Dial
(2).
3. Dial (9).
0
4.
5.
0
0
You may dial 81 through 88 instead of 9.
9... An extension automatically selects an idle
line within the CO line enable to call.
81 through 88...
An extension selects a trunk
group designated.
Dial the phone numper.
Press the MEMORY button.
After programming all CO buttons, return the
MEMORY switch to the “SET” position.
For dialing, refer to “One Touch Dialing”on
page 4-4.