Filter
Top Products
_............................................_
AB=
a_
: to limit the time to 1 minute
!
OD
1 0 :
to limit the time to 10 minutes . . . . . . default
Description
Enable limiting of the time any outside line can be
used when “Call Transfer-To Outside Line” (on
page 4-19) or “Call Forwarding-To Outside Line”
(on page 4-29) is used to forward a outside call
to an outside line or when you call to any outside
line using DISA.
Conditions
l
To erase a wrong entry, press the CLEAR
button.
Programming Table
See page 7-7.
The default time is 10 min., but this can be
changed from 1 minute through 32 minutes.
Programming
1.
Dial (22).
“CO-CO Dur. Limit” will be displayed.
2. Press the NEXT button.
“Time : 10 min” will be displayed and “10”
will blink.
3. Enter the duration limit with 1 or 2 digits
(1 through 32). z
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
3-30