Filter
Top Products
A= 111: to sound after 1
minute
0 2 :after 2 minutes
cl 3 :after 3 minutes .
. . . . . . . . default
cl 4 :after 4 minutes
cl 5 :after 5 minutes
cl 6 :after 6 minutes
cl 7 : after 7 minutes
cl 6 :after 8 minutes:
q
9 : after 9 minutes
Description
An alarm tone will be heard at the holding extension
to remind that you still has a call on hold.
The reminder will sound after 3 minutes but can
be changed.
There are 9 choices ranging from 1 minute to 9.
An alarm tone is heard from the built-in speaker
of the proprietary telephone and the handset
receiver of the standard telephone.
See “List of Tones” on page 6-7.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
Conditions
The hold time reminder is activated, even if the
hold recall time set is programmed to “Disable”.
Example:
4 minutes= lfim1411MEMORYl
Programming
1. Dial (17).
“Auto Hold Alarm” will be displayed.
2. Press the NEXT button.
“Time: 3 min” will be displayed and “3” will
blink.
Programming Table
See page 7-6.
3. Dial the time number (1 through 9).
3-25