Filter
Top Products
Use of Other Features
(cont.)
Description
This feature gives each message of the
SMDR an account code of the called or
calling party.
Station Message Detail Recording (SMDR
is cost saving feature that records all
[
incoming and outgoing calls through the
CO line.
1
1
.
This feature has two modes “Forced” and
“Option”. In the “Forced” mode, the
account code must be entered every time
the extension user dials. In the “Option”
mode, account code may be entered when
a record of the account code is needed.
When setting to the “Forced” mode, see
page 3-71.
Operation
Forced Mode
n
Making a
I Call
Lift
handset
Dial “9”
Dial
Wait for
account C.O. dial
code tone .
Account
[ 1
code is
4 digits.
Dial ‘k”
Dial
telephone
number
Again
Intermittent
tone is
heard.
l
You may dial 81 through 88 instead of
dialing 9.
5-10
n
Receiving a Call
If you want to record a calling party’s
account code in the SM DR, follow the
below-mentioned procedure;
Within 30 seconds after calling party hangs
up,
mpq
Flash
Dial ‘k”
Again
Dial account
hookswitch code
l
Dialing the account code must be done
before hanging up.
When the ‘Call on Hold for Standard
Telephone” on page 3-77 is placed in the
“Hold-2” mode, dial “20” after flashing of
the hookswitch in addition to the above
procedure. If any number except “20” is
dialed, the party will be disconnected.
Option Mode
n
Making or Receiving a Call
If you want to record a calling or called
party’s account code in the SMDR, follow
the below-mentioned procedure.
Within 30 seconds after calling or called
party hangs up,
Flash
hookswitch
•l
*
Dial “‘s” Again
Dial Account
account code is
code
[ 1
4 digits.
.I I
l
Dialing the account code must oe aone
before hanging up.
When the “Call on Hold for Standard
Telephone” on page 3-77 is placed in the
“Hold-2” mode, dial “20” after flashing of
the hookswitch in addition to the above
procedure. If any number except “20” is
dialed, the party will be disconnected.
0 You may dial 49 instead of pressing the-,
“jt” “s” button.
0 Account code require 4 numerical digits
except for the “ tf ” and “*” buttons.
0 If you enter a wrong account code, press
the “Jo” “ jc” button and enter the correct
code.