Filter
Top Products
.
:.................,......,..............-until the desired CO number (01 through 12) appears
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
until the desired jack number appears
m : on jack number 01
: on jack number 32
,
n : to assign the same on all 32 jacks
until the desired mode appears
default (all 32 jack numbers)
EF =B :
to assign the same on all 32 jack numbers
m----:-a:--
uescnpuon
The ringing start time during the day can be
7.
l
To advance to the next jack number,
delayed on a designated extension(s) when an
press the m button.
incoming call is received from the CO.The CO line
l
To return to the previous jack number,
that you want to delay the ring start time during the
press the m button.
day or night mode can be selected through the
l
To go to the desired jack number,
programming.
Programming
press the m button and then dial the
jack number.
1.
2.
3.
l
Dial (49)
for
day mode.
“Day Delayed CO” will be displayed.
0 Dial (50) for nrght~mode.
“Night Delayed CO” will be displayed.
Press the NEXT button.
“CO NO ? +” will be displayed.
Press the NEXT button or dial the CO number
IA4
+hr..,,nh i3\
\” I Llll”ULJll IL,.
“CO 01 : ~mmdtly” will be displayed.
lack number
4. Repeat pressing the m button until the
desired jack number appears, or press the
q
button and then dial the jack number.
-
5. Repeat pressing the SELECT button until the
desired mode is displayed.
6. Press the MEMORY button.
The LCD will stop blinking.
3-56
8. Repeat steps 5 to 7, to program the
assignment of the other jack numbers.
9.
l
To advance to the next CO number, press
the NEXT button.
l
To return to the previous CO number, press
the PREV button.
_ -I-_ -- I_ AL_
-I--:.._-I fir\ _..__I-__ -..---*I-_
m
I u go w III~:
uf3slrw
bu
numoer, press trte
SELECT button and then dial the CO
number.
10.
Repeat steps 4 to 9, to program the
assignment of the other CO numbers.
j!. Tn rat, ,rn tn
the, initinl nrnnrnm mnrln ,-.rdec
I” ICZLUIII L” LI1-z ,lIILIcII p’“y,a” llI”“G, fJl.zPS
the END button.
Programming Table
See
pages 7-18 through 7-21.