Filter
Top Products
Extension Feature
;.....‘.“. until the desired jack number (01 through 32) appears.
. . . . . . . . . . . . . . . . . . . . . .
A= m
:extension group 1
__ default (all 32 jacks)
a :extension group 8
i. . . . . . . . . . . . . . . . . . . . . . . . . . ..- ,JB=
r;;l
: to assign the same on all 32 jack numbers
/IFI : on jack number 01
13121 : on jack number 32
Description
Enables grouping of extension numbers by
department or floor by all extension numbers
into a maximum of 8 separate extension groups.
Each group has access to the “Paging Group” (on
page 4-25), “Call Hunting” (on page 3-15) and
“Dial Call Pickup” (on page 4-l 1) functions.
Programming
1.
Dial (60).
“Extension Group” will be displayed.
2. Press the NEXT button.
“Jack NO ? + ” will be displayed.
3. Press the NEXT button or dial the jack
number (01 through 32 ).
“#Ol : EXT GRP-1” will be displayed.
L
jack number
4. Dial the extension group number
(1 through 8).
5. Press the MEMORY button.
The LCD will stop blinking.
6.
l
To advance to the next jack number,
press the NEXT button.
o To return to the previous jack number,
press the PREV button.
l
To go to the desired jack number,
press the SELECT button and then dial the
jack number.
7.
Repeat steps 4 to 6, to program the
assignment of the other jack numbers.
8.
To return to the initial program mode, press
the END button.
Conditions
l
When you dial ‘Y’ instead of pressing the
NEXT button at step 3, in case all of 32 jack
numbers have been programmed to
extension group 1,
“ # *:EXT GRP-1” will be
displayed.
In case each of 32 jack numbers has been
programmed from extension group 1 to
extension group 8, “# *: Mixed” will be
displayed.
Programming Table
See
page 7-25.
3-66