Filter
Top Products
Description
n
n
.
DSS (Direct Station Select) Button:
makes the dialing to the extensions very
easy.
You can reach the extension party by simply
pushing the DSS Button.
Programmable Feature Button:
let you access various features of
KX-T123211 and speed dialing using the CO
line in addition to the numbers programmed
into the KX-T123211’s memory.
2. Enter the line access number.
Operation
Inter office Calling (Intercom)
1.
Lift the handset or press the SP-PHONE
button of pair telephone.
2. Press the DSS button of Console.
3. Start talking.
4. Hang up or press the SP-PHONE button
after completion of the conversation.
Transfer of Outside Calls to any Extension
1.
You are in conversation.
2.
Press the DSS button (Console) to which
the call is transferred.
3. Wait for Intercom party to answer and
announce call, then replace the handset or
press the SP-PHONE button.
Programming
l
Be sure the handset is in the cradle and the
SP-PHONE button is OFF.
l
Set the MEMORY switch of a pair telephone
(Proprietary telephone) to “PROGRAM”.
One Touch Dialing
1.
Press a programmable feature button of
Console.
9:automatic line access number.
8,l: access number of trunk group 1
88: access number of trunk group 8
3. Enter the phone number. I
4. Press the MEMORY button.
5. Repeat steps 1 to 4, to program on other
programmable feature button.
n
To Confirm a Stored Number
Repeat programming the same number into
the same station.
When the MEMORY button is pressed, a beep
will be heard.
l
two beeps _ The entry is the same as what
was
previously stored.
l
one beep
‘s. The entry is different from the
one
that was previously stored.
Repeat the procedure of
programming.
One Touch Access for System Features
Example:
Paging All Extensions (Dial 330)
1.
Press the programmable feature button of
Console.
2. Dial (330).
3. Press the MEMORY button of pair
telephone.
After programming all the number% return the
MEMORY switch to “SET”.
Dialing
1.
2.
Lift the handset or press the SP-PHONE
button of pair telephone.
Press the programmable feature button of
Console.
Conditions
Refer to “One Touch Dialing” page 4-4 and
“One Touch Access for System Features”
page
4-52.