Filter
Top Products
Area Code Routing Table
All North American area codes are assigned to routing pattern 1 by default, except area codes
N00 and N10, which default to 0.
To assign a different
1 At
Action = , enter 300.
routing pattern to an area
2 At
Data = , enter the area code.
code [AG]
3 You see the prompt,
Action = 301.
4 At Data = , enter a routing pattern (1-8), or 0 for no
pattern (CO routing). The default is 1.
Note The Home Area Code routing pattern is assigned by first
administering the Action=30/Data=[Area Code] under Main
Menu item 4 (System) and then administering the Action=300
Data=[Home Area Code] and Action=301 Data=[Pattern
Number] items.
Home Area Code Exception List
Note There can be as many as four exception lists. The maximum number of entries
for all lists combined is 800. You can have up to eight seven-digit telephone numbers
in these Home Area Code (HAC) Exception Lists.
Enter Home Area Code
1 At
Action = , enter 500.
Exception List Number
2 At
Data = , enter a list number (1-4).
Enter ARS Routing 1 At
Action = , enter 501. ‡
Pattern associated with
this HAC exception list.
2 At
Data = , enter a pattern number (1-8).
†
Action = 500 must be entered first.
12-6 Administering Automatic Route Selection (ARS)