Filter
Top Products
To troubleshoot
If the save is successful, the SAT displays:
SAVE COMPLETED SUCCESSFULLY
5 Press the STOP/EJECT button on the tape unit.
6 Rewind the tape.
7 Follow the Verify procedure below.
If the Save is not successful, the SAT displays:
SAVE FAILED
1 Rewind the tape and repeat the Save procedure.
2 If this save is successful, follow steps 5 through 7 above.
3 If this save is not successful, contact your AT&T service
representative.
Verify the Saved Translations
To begin 1 Insert cassette and rewind the tape (as required).
2 Press the PLAY button on the tape unit. (The tape unit
does not begin to operate yet.)
To Verify
1 From the Main Menu prompt, enter 9 to select
Save/Restore.
2 At Action = , enter 2. You see:
Save/Restore: Action = 2 Data =
3 Type d and at Data = , enter 1.
You see this warning message:
W25: YOU ARE ABOUT TO START A TAPE VERIFY
c for continue, any other key to abort
4 Type c. The entire line now reads:
Save/Restore: Action = 2 Data = 1
The tape unit automatically starts the Verify procedure.
The tape unit stops when the verification is complete.
If the verification is successful, the SAT displays:
VERIFY COMPLETED SUCCESSFULLY
(continued)
Administering Tape Save/Restore Operations
13-3