Filter
Top Products
To allow the user to
1 At
Action = , enter 71. ‡
configure data port
2 At
Data = , enter 1 for yes or 0 for no. The default is
parameters
1. For a STARLAN CP, the default is 0.
To permit mismatch of
1 At
Action = , enter 72. ‡
baud rate between this
port and a called port
2 At
Data = , enter 1 for yes or 0 for no. The default is 0.
To echo dialed characters
1 At
Action = , enter 73. ‡
during call
setup
2 At Data = , enter 1 for yes or 0 for no. The default is 1.
To set your disconnect
1 At
Action = , enter 74. ‡
code
2 At
Data = , enter:
1 for two short BREAKS
0 for one long BREAK.
The default is 1.
To display call progress
1 At
Action = , enter 75. ‡
text messages
2 At
Data = , enter 1 for yes or 0 for no. The default is 1.
To display connection
1 At Action = , enter 77. ‡
indication message
2 At Data = , enter 1 for yes or 0 for no. The default is 1.
‡ This is a Read-Only feature for the STARLAN CP.
Administering Data Line and STARLAN CP Ports 8-9