Filter
Top Products
TABLE 3-2
Initialization Sequence
(continued)
8 Voice and Data Station Records
Assign all station ports (except for attendant consoles),
form
following the procedures in Administering Voice Stations
and Administering Data Line and STARLAN CP Ports. Do
not enter class-of-service parameters yet. There are some
procedures you cannot complete until all stations are
assigned, such as button assignments. Be sure to record
each station’s port assignment on the individual voice
terminal or data terminal forms as you assign them.
9 Attendant Options and
Assign ports and enter class-of-service, attendant features,
Attendant Console forms
and button feature assignments for the attendant
console(s) following the procedures in Administering
Attendant Equipment and Administering Button Assignments.
10 Terminal forms
Enter class-of-service information for all voice and data
stations (and button assignments for multiline voice
terminals) following the procedures in Administering Voice
Stations, Administering Data Line and STARLAN CP Ports,
and Administering Button Assignments.
11 Direct Group Calling List
Enter DGC groups following the procedure in
Administering Direct Group Calling (DGC) Groups.
12 Automatic Route Selection
Enter ARS options and patterns following the procedure
Forms
in Administering Automatic Route Selection (ARS).
13
Tape Save/Restore
Save the system translations and verify their accuracy
following the procedures in Administering Tape Save/Restore
Operations.
When you have completed these steps, the system is initialized. Be sure to test that the
system is properly initialized following the procedures in the System 25 Installation and Test
Manual.
Initializing the System 3-5