Filter
Top Products
To restrict access to all
1 At
Action = , enter 4.
other trunk pools
2 At
Data = , enter 1 for yes or 0 for no. The default is 0.
To set calls to this station 1 At
Action = , enter 12.
to hunt to another station
2 At
Data = , enter the DDC of the station to hunt to, or 0
if this station is busy
for no hunt. The default is 0.
Note If you are assigning this option to a STARLAN CP, the
value you assign to the first port will not be copied to the
other ports on the board. You need to administer each port
separately for this action.
To restrict this station 1 At
Action = , enter 13.
from making any
outward calls
2 At
Data = , enter 1 for yes or 0 for no. The default is 0.
To assign a toll restriction
1 At
Action = , enter 14.
class
2 At
Data = , enter a toll restriction class number, 0-4, from
the following list (the default is 0):
0 - Not toll restricted
1 - Toll call allowed lists 1-4
2 - Toll call allowed lists 2-4
3 - Toll call allowed lists 3-4
4 - Toll call allowed list 4 (only)
Administering Data Line and STARLAN CP Ports 8-5