Filter
Top Products
TABLE 16-28 Save/Restore and System Restarts (Menu=9)
ACTION
DESCRIPTION
DATA
1 Save (Backup) translations
[1 to run]
2 Verify translations
[1 to run]
3 Restore translations
[1 to run]
10
Force a system warm start. FOR QUALIFIED
[1 to run]
SYSTEMS TECHNICIAN ONLY
20
Force a system cold start. FOR QUALIFIED
[1 for Full Default, 2
SYSTEMS TECHNICIAN ONLY.“ Full
for Limited Default]
Default” cold start will reinstate all default
values (true cold start). “Limited Default” cold
start will reinstate default values everywhere
except for port boards.
* For Action=1, you need to press the PLAY and RECORD buttons,
For Action=2 and Action=3, you need to press the PLAY button.
CAUTION: Action=3 will interrupt phone service for about five minutes.
TABLE 16-29 RS232 Port Administration (Menu=10)
In response to “RS232=”,
enter the RS232 connector (1-4) to be administered.
ACTION
DESCRIPTION
DATA
1
Reassign RS232 connector capability
[See footnote † for
1
Reassign RS232 connector capability
[0 to disconnect port or
see footnote † for
options and defaults]
2
Change the RETURN delay
[0-2; 0]
3
Change the baud rate
[300, 1200, 4800, 9600
See footnote † for defaults]
† The default for each Target connector is as follows:
TARGET
DEFAULT DATA (=CAPABILITY) DEFAULT BAUD RATE
1
1 (=Administration)
1200, 300 (auto-baud)
2
2 (=SMDR)
1200
3
3 (=Save/Restore Tape)
1200
4
Reserved
9600, 1200 (auto-baud)
Command Reference
16-33