Filter
Top Products
TABLE 16-19 System Administration (Menu=4) (continued)
ACTION
DESCRIPTION
DATA
41
Specify the number of rings before calls
[0-31;
2]
are sent to call coverage or call following
calls return to their home station
50
Set time of day
[HHMM]
51
Set the date
[MMDDYY]
52
Allow SMDR records to be sent to the
[1=Y
/ 0=N]
SMDR port
53
Start billing calls how many seconds after
[10-255;
40]
the last digit is dialed
60
Specify the modem request code
[1-9999;
820]
61
Does the receiver respond to remote loop
[1=Y
/ 0=N]
62
Disconnect on loss of carrier
[1=Y
/ 0=N]
63
Are pins CF and CB common
[1=Y
/ 0=N]
64
Disconnect on received space
[1=Y
/ 0=N]
65
Should the system send a space character
[1=Y
/ 0=N]
on disconnect
70
Should maintenance busy of GS trunks be
[1=Y /
0=N]
blocked?
71
Assign the CO trunk pool access code
[1-9999]
72
Set the number of DID digits used to
[2-4; 0 for none; 3]
match against station PDCs
73
Assign the number of account code digits
[0-15;
15]
74
Display/change expert mode prompt (less
[“Command: “]
than 9 printable characters)
75
Change administration password (less
[”8 characters or less”]
than 8 printable characters, no spaces
allowed, display always shows “????????” )
81
Switched Loop Attendant system: Audible
[1=Y /
0=N]
tone at expiration of hold timer?
Continued on next page
Command Reference
16-23