Filter
Top Products
Administering Trunks
This section shows you how to:
■ Assign and remove trunks
■ Assign class-of-service parameters for various types of trunks
Assigning a Trunk
To assign a trunk [AG]
From the Main menu prompt, enter 1, then follow the
procedures below to define the trunk type and assign a trunk
number.
Define the trunk type:
1 From the Main menu prompt, enter 1.
2 At
Port = , enter the carrier/slot/port (CSSPP) to which
you want to assign the trunk.
3 At
Action = , enter 1.
4 At
Data = , enter the trunk type number. Select the
number from the next table.
Administering Trunks 5-1